T2 Extension Tube Set, BRESSER
Set of 5 extension tubes with T2 thread on both sides for exact distances and secure hold of cameras for astrophotography. Also comes with SC to T2 thread adapter.
In astrophotography, most cameras are connected to a telescope via a T2 thread (M42x0.75), the most popular international standard. However, in many cases, T2 and T2-ring adapters for connecting telescope focusers to a camera are not sufficient, as specific distances must also be observed. This is especially important when using correctors, reducers or flatteners. This extension tube set, which consists of 5 mm, 7.5 mm, 10 mm, 15 mm and 30 mm tubes, will allow you to obtain almost any distance using the corresponding combination. Each tube has a T2 interior thread on one side and a T2 exterior thread on the other side.
Most telescopes either include a T2 thread adapter, or the eyepiece can be used with a simple T2 thread adapter with a 2 plug-in diameter (item no. 0510365).
However, Maksutov-Cassegrain, Schmidt-Cassegrain, ACF or RitcheyChrétien telescopes may use a so-called SC thread. To allow you to use this extension tube set with these telescopes, the set also includes an SD to T2 thread adapter.
- 5 T2 tubes with lengths from 5 mm to 30 mm
- Combination of tubes allows you to obtain distances of 5 mm to 67.5 mm
- For exact camera distances in astrophotography
- 5x T2 extension tubes (5/7.5/10/15/30 mm)
- 1x SC to T2 thread adapter
|DIMENSIONS & WEIGHTS|
|Total length||88 mm|
|Total width||55 mm|
|Total height||55 mm|
|Net weight (without access.)||80 g|